The CRYO cryochamber – cryosauna is built on 7 years of experience in the cryotherapy business.
Thanks to continuous feedback from thousands of avid cryotherapy clients and qualified cryotherapy operators we are able to offer a cryo machine with great confidence in the safety, reliability & quality of session.
The cryochamber  is known by many as the most versatile whole body cryotherapy chamber thanks to its’ unique pivoting cabin doors and ease of installation that allows vast flexibility for those considering starting a new cryotherapy center. Installation and operation is very straightforward and that is why our cryochamber  is often installed as a mobile cryo chamber, which offers a range of opportunities for many. Thanks to this, the cryochamber has been installed in many otherwise inaccessible locations.
When compared to other cryotherapy machines on offer, the technical advantages of our cryo chamber   include balanced distribution of cool air inside the cryocabin, while offering maximum safety for clients in the form of a number of essential safety features, efficiency of the vapor mechanism, and a perfectly dry feeling during sessions. The cryochamber  is based on a liquid nitrogen system which has undisputable economic advantages and practical results over other forms of whole body cryotherapy and has become the preferred system within WBC.

• Unit weight:  400 Kg
• Unit dimensions: 2220mm x 1800mm x 900mm
• Lift Mechanism - operating weight: up to 150 kg
• Coolant: Liquid Nitrogen
• Working Pressure: 1,5 BAR (22 PSI)
• Electricity Consumption: Up to 2 kWh
• AC 220V / 50Hz Power supply required
• Liquid Nitrogen Consumption: Cooling phase: 6 L , Procedure: 3-7 L (depending on duration & vessel type)

INSTALLATION REQUIREMENTS:

• Cryosauna surface requirements: Minimum 6m2
• Room surface requirements: Minimum 15m2
• Ventilation: Build-in air extraction system
• Fresh air circulation
• Oxygen sensor installation

The first condition is installing the cryogenic chamber in a sufficiently large room that meets the criteria of accommodating a nitrogen based whole body cryo chamber. The recommended floor area is 15 – 20 square meters (45 – 60 square feet). The CRYOCHAMBER itself is very versatile and can be installed in most type of rooms as the unit separated into parts is able to pass through doors at a width of 60 cm which is one of kind among cryo chamber equipment. Nevertheless, the cryochamber requires the passage of nitrogen cylinders once the cryo chamber is installed and that must therefore be considered to facilitate the supply of nitrogen cylinders. Our cryo chamber runs on liquid nitrogen, which is compressed gas into liquid form. Nitrogen in its gas form is nontoxic and is the primary component of the air that we breathe. Nevertheless, if the concentration of nitrogen in the air exceeds a certain limit (below 19% in the ambient air), there is an increased risk of hypoxia (lack of oxygen) which can lead to discomfort in the form of lightheadedness or fainting in very rare cases. That’s why we have a number of security measures in place in each and every installation. First, we require an opening on a wall with a diameter of at least 12 cm to allow for evacuation of nitrogen air from the client cryocabin. This can of course be done through a wall, or the evacuation can also be done with the help of an integrated ventilation system. To ensure maximum safety within the cryotherapy room, an air renewal system must be installed in nearly all cases. The room must also be equipped with an oxygen sensor to signal oxygen levels within the room. In case the preset level is exceeded an alarm will go off, turn on the ventilation system and make the room 100% safe.